Nouvelles de l'industrie

  • 152019-08

    Geotextile laying basic and process requirements

    1. The joint shall intersect the slope line; where the slope is balanced or there may be stress, the horizontal joint shall be greater than 1.5 m. 2. On the slope surface, anchor one end of the geotextile, and then lay down the slope of the coil to ensure that the geotextile is kept tight. 3. All geotextiles must be pressed with sand bags, which will be used during laying and retained to the top layer of material.

  • 132019-08

    Geosynthetics Clay Liner

    Geosynthetics Clay Liner is a kind of geosynthetic material specially used for artificial lake waterscape, landfill, underground garage, roof garden, pool, oil depot and chemical yard. It is made of high expansion.

  • 092019-08

    Main features of polyester filament non-woven geotextile

    Polyester long-fiber non-woven geotextile has excellent heat and light resistance. Even in the short-term exposure in an environment of nearly 20 ° C, its performance is almost unchanged. After extensive trials and practice, polyester long-fiber non-woven geotextiles have long-term corrosion resistance to various natural soils, moisture and microorganisms. This product is mainly used in the following characteristics:

  • 082019-08

    The function of polyester filament geotextile

    1, Seperation That is, the use of geotextiles to seperate building materials (such as soil and sand, sand and gravel, soil and concrete) with different physical properties (particle size, distribution, consistency and density). The two or more materials are not lost or mixed, and the overall structure and function of the material are maintained to enhance the load bearing capacity of the structure.

  • 062019-08

    Polyester Continuous Filament needle punched non woven geotextile

    The filament geotextile is a polyester filament needle-punched non-woven geotextile, which does not contain chemical additives and is not heat treated. It is an environmentally friendly building material.

  • 062019-08

    What is biaxial plastic geogrid

    The biaxial plastic geogrid is made of polypropylene (PP), plasticized extruded sheet, punched, heated, longitudinally stretched, and transversely stretched.

  • 022019-08

    Geogrid construction points

    Construction site: It is required to be compacted and leveled, and the spiked protrusions are removed.

  • 312019-07

    Uniaxial tensile geogrid

    The Uniaxial geogrid is a kind of high-molecular polymer as the main raw material, and a certain anti-ultraviolet and anti-aging additive is added. After uniaxial stretching, the original distributed scattered chain molecules are rearranged in a linear state. High-strength geotechnical material which is extruded into a thin plate and then punched into a regular hole net and then longitudinally stretched. In this process, the polymer is oriented in a linear state and a long elliptical network-like monolithic structure with uniform distribution and high joint strength is formed. This structure has a very high tensile strength and tensile modulus, tensile strength of 100-300KN / m, close to the level of low carbon steel, much better than traditional or existing reinforced materials, especially the company These products have a high international level (extension of 2% - 5%) tensile strength and tensile modulus. The chain system that provides the ideal force for bearing and diffusion. The product has a high tensile strength (>150Mpa) and is suitable for various soils. The Uniaxial geogrid is a kind of high-molecular polymer as the main raw material, and a certain anti-ultraviolet and anti-aging additive is added. After uniaxial stretching, the original distributed scattered chain molecules are rearranged in a linear state. High-strength geotechnical material which is extruded into a thin plate and then punched into a regular hole net and then longitudinally stretched. In this process, the polymer is oriented in a linear state and a long elliptical network-like monolithic structure with uniform distribution and high joint strength is formed. This structure has a very high tensile strength and tensile modulus, tensile strength of 100-300KN / m, close to the level of low carbon steel, much better than traditional or existing reinforced materials, especially the company These products have a high international level (extension of 2% - 5%) tensile strength and tensile modulus. The chain system that provides the ideal force for bearing and diffusion. The product has a high tensile strength (>150Mpa) and is suitable for various soils.

  • 302019-07

    Biaxial plastic geogrid

    It is suitable for various dams and subgrade reinforcement, slope protection, wall reinforcement, and permanent foundation support for large airports, parking lots and terminal yards.

Consultation mail
S'il vous plaît n'hésitez pas à donner votre demande dans le formulaire ci-dessous. Nous vous répondrons dans 24 heures.